02/308.30.31

Rhino Ultimate Studio Slider Bundle RENTAL

133,10 

Rhino Ultimate Studio Slider Bundle RENTAL

  • Two-Axis Motorized Slider System
  • Rhino EVO PRO Slider
  • Steel 42″ Rails with 50 lb Load Capacity
  • Lightweight 24″ Carbon Fiber Rails
  • Rhino Motion Motor & Controller
  • Rhino Arc Motorized Pan Head
  • Spring-Loaded Legs with Index Marks
  • Carrying Case

En stock

 

Rhino Ultimate Studio Slider Bundle RENTAL

  • Two-Axis Motorized Slider System
  • Rhino EVO PRO Slider
  • Steel 42″ Rails with 50 lb Load Capacity
  • Lightweight 24″ Carbon Fiber Rails
  • Rhino Motion Motor & Controller
  • Rhino Arc Motorized Pan Head
  • Spring-Loaded Legs with Index Marks
  • Carrying Case

The Ultimate Slider Bundle from Rhino is designed for professionals who need a versatile slider package that is adaptable to a variety of cameras setups, shots, and locations. The bundle features the 42″ Rhino EVO PRO Slider, which provides over 3′ of sliding distance and supports heavy camera setups weighing up to 50 lb. Its interchangeable rail design lets you swap the 42″ steel rails with a set of 24″ carbon rails when you need a lightweight package with a smaller footprint. This bundle also includes the Rhino Motion and Rhino Arc motorized motion control systems for adding motion to your time-lapse and real-time videos. An included soft carrying case is designed to fit the fully assembled 42″ slider, including the attached Rhino Motion and Rhino Arc, as well as optional accessories such as a fluid head.

Rhino Motion is the brains behind the operation and is used to add motorized sliding motion. Use the wheel on the Rhino Motion control unit to react to live performances, or program a slide with specific in and out points, travel time, ramping, and looping. The Rhino Arc mounts directly on the slider carriage and, after connecting to the Rhino Motion controller using an included cable, allows you to add motorized pan motion to your linear slides to capture dynamic arcing or sweeping shots. For creating time-lapse videos, a built-in intervalometer is used to trigger your camera’s shutter when connected to the camera using a separately available shutter release cable.

  • Slider EVO Pro (42″)

    The Rhino Slider EVO Pro is a highly versatile, belt-driven camera slider that can adapt to your shooting needs. The system includes stainless steel rails that support loads up to 50 lb, which can be swapped for optional 42″ rails when a more travel-friendly size is required. Additionally, optional carbon fiber rails are available for when you’re working with lighter loads and want to keep the weight of the slider down. The slider can also be upgraded to a motorized system with the addition of the separately available Rhino Motion, allowing you to capture smooth live motion and time-lapses with a single motor.

    The Rhino Slider EVO features a 3/8″-16 screw on the camera carriage for attaching a ball head or flat-base fluid head. It can be center-mounted on a tripod via 1/4″-20 and 3/8″-16 threaded holes in the center of the rails, or supported using two tripods or stands via 1/4″-20 and 3/8″-16 threads at the ends of the tripod. You can also setup the slider for ground-level or table-top shooting using the included spring-loaded legs with index marks. The legs fold up for compact storage.

    Key Features
    • Ability to switch between carbon fiber and stainless steel rails (24″ and 42″ lengths)
    • 42″ stainless steel included
    • Supports loads up to 50 lb
    • Optional Rhino Motion add-on
    • Camera carriage with 3/8″-16 screw
    • Integrated carriage brake
    • Optional flywheel
    • 3/8″-16 and 1/4″-20 mounting threads (center and ends)
    • Spring-loaded, folding all-terrain legs with index marks
  • EVO Carbon Rails (24″)
    The 24″ Rhino EVO Carbon Rails are designed for use with any Rhino Slider EVO model. Thanks to the EVO Slider’s interchangeable rail system, you can easily swap out the longer 42″ rails of EVO Carbon and PRO models for 24″ rails when you need a more mobile setup, or swap out the rails on a 24″ EVO PRO when you want to reduce slider weight and are working with lighter camera loads. The rails weigh just 1 lb and support loads up to 15 lb. The rails are also compatible with Rhino V1 Sliders.
    Key Features
    • Carbon fiber rails for Rhino Slider EVO
    • 15 lb load capacity
    • Integrated center mounting plate
  • Arc Motorized Pan Head for Rhino Motion

    Liven up your time-lapse and real-time motion shots with the Rhino Arc Motorized Pan Head. Designed to integrate with an existing Rhino Motion system, the Rhino Arc lets you add panning to your linear movement to create dynamic arcing or sweeping shots. Installing directly on your EVO Slider carriage, the compact device weighs only about 1 lb, yet supports camera setups weighing up to 15 lb. Its internal motor is powered by a built-in rechargeable battery.

    The Rhino Arc connects directly to the Rhino Motion controller using an included cable, allowing you to control both linear and pan motion using a single controller. An OLED screen on the Rhino Arc provides quick visual verification that both devices are paired together. For creating time-lapse videos, a built-in intervalometer is used to trigger your camera’s shutter when connected to the camera using a separately available shutter release cable.

    Features
    • For use with Rhino Motion motorized slider system
    • Adds panning motion to your linear slides
    • 15 lb Load capacity
    • 360° Rotation
    • Internal motor
    • Built-in rechargeable battery
    • Connects to Rhino Motion controller using included cable
    • Built-in intervalometer
    • OLED status screen
    • Compact size
    • Weighs 17 oz
  • Slider EVO Carrying Case (42″)
    Store and protect your 42″ EVO camera slider with the Rhino Slider EVO Carrying Case. To facilitate fast setups in the field, the case fits a completely assembled slider, including an attached Rhino Motion, Rhino Arc, and even a fluid head thanks to an expandable “pop top” design. A soft interior lining helps protect the slider from scratches, while retaining straps keep the slider secured in place.
    Key Features
    • Protects your 42″ Rhino Slider EVO
    • Expandable pop-top lets you keep your fluid head attached
    • Retaining straps keep your slider in place
    • Storage for extra 24″ EVO rails

     

Poids 30 kg
Dimensions 27.94 × 27.43 × 16.76 cm
DEMO REQUEST

Get your hands on a Hasselblad: contact us for more information!

Sensor type

CMOS, 50 megapixels (8272 × 6200 pixels, 5.3 × 5.3 μm)

Sensor dimensions

43.8 x 32.9mm

Image size

Stills: RAW 3FR capture 65MB on average. TIFF 8 bit: 154MB; Video: HD (1920 x 1080p)

File format

Stills: Lossless compressed Hasselblad 3FR RAW + JPEG
Video: H.264 Compressed (25 fps)

Shooting mode

Single shot stills, Video

Colour definition

16 bit; Dynamic range approx. 14 stops

ISO speed range

ISO 100, 200, 400, 800, 1600, 3200, 6400, 12800 & 25600

Storage options

Dual SD card slots

Colour management

Hasselblad Natural Colour Solution

Storage capacity

16GB card holds 240 images on average

Capture rate

1.7 – 2.3 frames per second

Display

3 inch TFT type, 24 bit colour, 920K pixels; Touch functionality: Yes, full support; Live View: On camera, host and iOS device with high frame rate (30 fps)

IR filter

Mounted in front of sensor

Software

Phocus for Mac and Windows. Compatible with Adobe Photoshop Lightroom® and Adobe Camera Raw®

Platform support

Macintosh: OSX version 10.10; PC: Windows 7 / 8 / 10 (64 bit only)

Host connection type

USB 3.0 (5 Gbit/s) Type-C connector, Mini HDMI, Audio In/Out

Additional connections

Mini HDMI, Audio In/Out

View camera compatibility

Yes, Mechanical shutters controlled via flash sync.
Electronic shutters can be controlled from Phocus

Operating temperature

-10 – 45 ̊C / 14 – 113 ̊F

Wi-Fi

802.11 a, b, g, n, ac (depending on region)

Dimensions

Camera Body only: 150 x 98 x 71 mm

Weight

725g (Camera Body and Li-ion battery)

Camera type

Mirrorless Large Sensor Medium Format

Lenses

Hasselblad XCD lenses with integral lens shutter

Shutter speed range

60 minutes to 1/2000 sec with XCD Lenses

Flash sync speed

Flash can be used at all shutter speeds

Viewfinder options

2.36MP XGA Electronic Viewfinder

Focusing

Autofocus metering via contrast detection; Instant manual focus override

Flash control

Automatic TTL centre weighted system. Nikon™ compatible hotshoe
Output can be adjusted from -3.0 to +3.0 EV

Exposure metering

Spot, Centre Weighted and CentreSpot

Power supply

Rechargeable Li-ion battery (7.2 VDC/3200 mAh)